Planetary gear calculator
Sun gear, equally spaced planets, carrier and internal ring gear. The calculation is for the most common arrangement: ring fixed, sun input, carrier output.
Results · planetary gear
- Ring teeth zr
- 60
- Gear ratio i
- 3.500
- Sun reference diameter ds
- 48.000 mm
- Planet reference diameter dp
- 36.000 mm
- Ring reference diameter dr
- 120.000 mm
- Carrier radius (centre distance) a
- 42.000 mm
- Carrier radius without shift a₀
- — mm
- Working pressure angle αw
- — °
- Ring profile shift xr
- —
- Planet tip diameter da,p
- 40.000 mm
- Sun tip diameter da,s
- — mm
- Ring tip diameter da,r
- — mm
- Span measurement W (sun)
- — mm
- Span measurement W (planet)
- — mm
- Dimension over balls/pins M (sun)
- — mm
- Dimension over balls/pins M (planet)
- — mm
- Dimension between balls M (ring)
- — mm
- Tooth thickness allowances Asne / Asni (sun)
- — mm
- W limits max / min (sun)
- — mm
- M limits max / min (sun)
- — mm
- Tooth thickness allowances Asne / Asni (planet)
- — mm
- W limits max / min (planet)
- — mm
- M limits max / min (planet)
- — mm
- Tooth thickness allowances Asne / Asni (ring)
- — mm
- M limits max / min (ring)
- — mm
- Can they be equally spaced?
- Yes
- Clearance between adjacent planets
- 32.746 mm
Results are for the initial values; they update when you change the values.
Planetary gear formulas
| Quantity | Formula | Example |
|---|---|---|
| Ring tooth count | zr = zs + 2 · zp | 60 |
| Gear ratio (ring fixed) | i = 1 + zr / zs | 3.500 |
| Carrier radius | a₀ = m · (zs + zp) / 2 | 42.000 mm |
| Working pressure angle | inv αw = inv α + 2(xs + xp) tan α / (zs + zp) | 20.000° (x = 0) |
| Working carrier radius | a = a₀ · cos α / cos αw | 42.000 mm |
| Ring shift | xr = xs + 2 · xp (zr − zp = zs + zp) | 0.000 |
| Assembly condition | (zs + zr) / N is a whole number | Yes |
| Clearance between planets | 2 · a · sin(180° / N) − da,p > 0 | 32.746 mm |
| Dimension over balls/pins | inv αM = inv α + D / db − π / z + s / d; M = db / cos αM + D (odd z: db cos(90°/z) / cos αM + D) | D automatic: contact on the d + 2xm circle |
| Dimension between balls (internal gear) | inv αM = inv α + e / d − D / db; M = db / cos αM − D, e = m(π/2 + 2x tan α) | x > 0 opens the space |
| Measurement limits | W = W₀ + Asn · cos αn; M with the same ball for thickness s + Asn (Asne upper, Asni = Asne − Tsn lower allowance) | cd25 default |
What you should know
With the ring fixed, sun input and carrier output, the ratio i = 1 + zring / zsun is always greater than 2; in practice a single stage is used for ratios of 3–10.
If the assembly condition is not met, the planets cannot be equally spaced; change one of the tooth counts by a tooth or two.
The program also calculates the other arrangements (carrier fixed, sun fixed), speeds, torques and profile-shifted planets.
Video tip

Design this gear with profile shift in the program; get undercut and interference checks, strength, technical drawing, 3D model and STEP / DXF output.
Apply for the free beta