The free beta is open. Apply to try the program →
Evolventix
Sheet 2 · gear calculator

Rack and pinion calculator

A straight rack and the pinion that drives it. A rack has no circles; it is measured on the pitch line. When the pinion turns one revolution, the rack travels the circumference of the reference circle.

Values

Pressure angle 20°, ISO 53 basic rack. Profile shift moves the pinion x·m away from the rack; the rack and the travel per revolution do not change. Change a value and the results update at once. Tooth thickness allowance and tolerance series are from the program's tables (based on IS 3681 = DIN 3967). The page address carries your values; you can share the link.

Technical drawing · drawn with your values

Results · rack and pinion

Pitch p
6.283 mm
Tooth thickness s (on the pitch line)
3.142 mm
Addendum ha
2.000 mm
Dedendum hf
2.500 mm
Tooth depth h
4.500 mm
Tip width sa
1.686 mm
Pinion reference diameter d
40.000 mm
Pinion tip diameter da
44.000 mm
Pinion root diameter df
35.000 mm
Pinion tooth thickness s (on the reference circle)
— mm
Span measurement W (pinion)
— mm
Dimension over balls/pins M (pinion)
— mm
Tooth thickness allowances Asne / Asni (pinion)
— mm
W limits max / min (pinion)
— mm
M limits max / min (pinion)
— mm
Pinion axis – pitch line
20.000 mm
Travel per pinion revolution
125.664 mm
Rack speed v
12.57 m/min

Results are for the initial values; they update when you change the values.

Rack and pinion formulas

Example: m 2, z 20, n 100 (the page's initial values). Figures from the program's calculation core.
QuantityFormulaExample
Pitchp = π · m6.283 mm
Tooth thicknesss = p / 23.142 mm
Addendumha = m2.000 mm
Dedendumhf = 1.25 · m2.500 mm
Tip widthsa = s − 2 · m · tan 20°1.686 mm
Pinion axis – pitch lineH = d / 2 + x · m20.000 mm
Shifted pinionda = d + 2m(1 + x), df = d − 2m(1.25 − x), s = m(π/2 + 2x tan 20°)44.000 / 35.000 / 3.142 mm
Travel per revolutionL = π · d = π · m · z125.664 mm
Rack speedv = π · d · n / 100012.57 m/min
Dimension over balls/pinsinv αM = inv α + D / db − π / z + s / d; M = db / cos αM + D (odd z: db cos(90°/z) / cos αM + D)D automatic: contact on the d + 2xm circle
Measurement limitsW = W₀ + Asn · cos αn; M with the same ball for thickness s + Asn (Asne upper, Asni = Asne − Tsn lower allowance)cd25 default

What you should know

Divide the rack length by the pitch to get the tooth count: a 1 metre, module 2 rack has 1000 / 6.283 ≈ 159 teeth.

The height from the back of the rack to the pitch line sets the height of the pinion axis: the axis is H above the pitch line.

When several rack pieces are joined end to end, the gap at the joint must be one pitch; otherwise the pinion catches at the joint.

Design this gear with profile shift in the program; get undercut and interference checks, strength, technical drawing, 3D model and STEP / DXF output.

Apply for the free beta